Marvel 9215 Sata controller support
#4
Hello,

I got the following SATA controller card with the Marvell 88SE9230 chipset working: https://www.amazon.de/gp/product/B01ENKQ...UTF8&psc=1

The trick was to put pci=nomsi into the kernel boot parameters in /boot/extlinux/extlinux.conf

(also, before you start looking for driver errors for hours, check if your hard disks are actually working, a defective one cost me n hour of debugging today Big Grin )


Messages In This Thread
Marvel 9215 Sata controller support - by MisterA - 09-03-2018, 02:38 PM
RE: Marvel 9215 Sata controller support - by mmatyas - 09-24-2018, 04:31 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  ROCKPro64 with 16 ports SATA controller ZeblodS 18 16,498 09-17-2022, 09:20 PM
Last Post: caroljames972022
  Support for Refresh rates Above 60 publiclewdness 0 474 01-01-2022, 11:40 PM
Last Post: publiclewdness
  PCI-E X4 to M.2/NGFF NVMe SSD - support? AndyOfLinux 22 20,308 12-13-2021, 11:04 AM
Last Post: Cerberus
  Existings disks and using a StarTech SATA Controller jkugler 1 1,013 12-09-2021, 06:41 AM
Last Post: SVDSHRDJD
  Rockpro64 Sata Card kills itself jerry110 33 29,829 10-20-2021, 04:36 AM
Last Post: fieni
  Right direction SATA card corax 2 1,602 09-15-2021, 12:46 PM
Last Post: corax
  Won't boot with SATA card rjzak 4 3,868 01-09-2021, 05:56 PM
Last Post: kuleszdl
  SATA issues machina 25 23,096 10-16-2020, 12:16 PM
Last Post: lrb
  Cheap 4-port SATA card working with RockPro64 4Gb andyburn 6 7,541 08-10-2020, 08:36 PM
Last Post: zer0sig
  PCI Express x4 Device Support machinevault 4 5,347 07-13-2020, 01:32 PM
Last Post: pgwipeout

Forum Jump:


Users browsing this thread: 1 Guest(s)