ANNOUNCING *BETA* RELEASE OF RECALBOX FOR THE ROCK64

[pascal06n]

I've a probem with the beta.

With Recalbox I don't see anything on the screen. I used a HDMI > DVI cable. The monitor is not detecting any signal.
(I confirm the HDMI > DVI works fine : I used other linux version).
I can access recalbox web interface, ssh is working fine as well.

I've tried with several settings in recalbox-conf :
global.videomode=CEA 1 HDMI
or
global.videomode=DMT 35 HDMI


I've also created a config.txt in /boot
With these settings :

hdmi_force_hotplug=1
config_hdmi_boost=4
hdmi_group=1
hdmi_drive=1
hdmi_mode=4

not better...

But I've tried several setting on the web interface and I've noticed something really weird : if I start by default on Kodi I see Kodi (display is working fine). But if I let recalbox starting (or if I go back from odi to recalbox)... it doesn't work.  I've tried with other linux img such as debian, lakka, I don't have the same problem...

Any idea ?

Try removing:

Code:

video=HDMI-A-1:1920x1080@60

in /BOOT/extlinux/extlinux.conf

See if that will work. Whats the native res of the monitor ?

Hi Luke,

The native resolution of the screen is 1280x1024.
(LG 1905 flatron 1950 B)

It works fine when I remove the parameter you told me about in extlinux.

Thank you to Mrfixit2001 and you for this great work !

Best regards,