Variable Gigabit Ethernet speed?
#4
I did some tests yesterday with one of my Pine 2GB boards...  I consistently only get about 33 Mbit/s to or from Pine...  For consistency - I measured also several other devices hooked up to the same Gbit switch :

1. AMD Phenom Desktop running elementary freya, consistently get approx 933 Mbit/s (intel branded Gbit NIC)
2. i7 octacore Asus laptop running Ubuntu 15.10, consistently get ~Gbit results (USB 3.0 gbit dongle - realtek chipset)
3. HP Microserver NL40 (dual core AMD) - running FreeBSD/FreeNAS, consistently get ~Gbit results (intel chipset on/board Gbit NIC)

iperf from Pine64 to / from those three hosts?  Consistently get sub-par, lower than 100 Mbit results (e.g. ~ 33 mbit/s).  This board is plugged directly into an Edimax Gbit switch (as are the other three machines).

The pine is running the latest Debian Jessie XFCE build with the hard-coded MAC address in /boot/uEnv.txt.

Also - for comparison, I have an NTC CHIP running debian jessie kernel 4.3, with an Asus branded (AXP) USB ethernet dongle, I get ~33 Mbit/s - and this host is travelling through a TPLink router, over 500 Mbit ethernet over power to get to the switch and the iperf "server" (the AMD Phenom desktop).
  Reply


Messages In This Thread
RE: Variable Gigabit Ethernet speed? - by fire219 - 07-20-2016, 12:43 PM
RE: Variable Gigabit Ethernet speed? - by UnixOutlaw - 08-24-2016, 10:15 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Strange OpenSSL RSA speed Test issue _835_ 2 3,610 07-27-2017, 12:51 AM
Last Post: _835_
  Ethernet issue Matthew 4 6,380 07-21-2017, 08:24 AM
Last Post: Matthew
  CPU speed / governor=performance? sheffield_nick 2 5,958 07-20-2016, 10:17 AM
Last Post: Fourdee
  network issue with no ethernet chrwei 4 7,278 05-03-2016, 11:22 AM
Last Post: longsleep

Forum Jump:


Users browsing this thread: 1 Guest(s)