05-14-2016, 08:36 PM
(05-14-2016, 11:29 AM)luggi Wrote: With `ethtool -s eth0 speed 100 duplex full` everything is working fine. I tested 3 power supplies ranging from 2.5A to 3.5A. The only thing that I didn't try was using a shorter ethernet cable. I am using a 10m ethernet cable I might suspect that could be the culprit.
Will try a shorter cable and report here.
Just tried a shorter ethernet cable and nothing changed still utterly slow in gigabit mode. Totally fine in 100Mbit mode.
I am using a 2GB A64+ using longsleeps ubuntu image using this kernel
`Linux pine64 3.10.101-0-pine64-longsleep #39 SMP PREEMPT Sat May 7 12:39:25 CEST 2016 aarch64 aarch64 aarch64 GNU/Linux`
What hardware make/model is on the other end of the cable. So many seem to see a issue like this maybe its a common piece of hw the pine is not connecting with properly?