How to revert to stock bootloader?
03-04-2021, 02:09 AM
(This post was last modified: 03-04-2021, 02:13 AM by LMM.
Edit Reason: additional
)
(03-03-2021, 09:19 PM)nyankat Wrote: Hi folks, after my troubles installing Debian the other day I decided to try some other distros instead of diving too deep down that rabbit hole just yet.Hi,
To my disappointment, I was unable to get any video out the HDMI port on either Manjaro or Armbian.
I think the problem may be the bootloader I flashed to the SPI which doesn't seem to initialize the HDMI display (I get no video during the bootloader, nor during kernel boot).
Is there a microSD image I can use to flash the stock bootloader back so that the board is in the same condition it was as when I got it?
if I understand well this instruction : https://github.com/sigmaris/u-boot/wiki/...oot-to-SPI from @sigmaris, there is an image that erases the SPI (it is similar to the instructions you gave your link). Have you tried to plug the hdmi cable power on ? I also use Ayufan image (but not the sigmaris image) and I a face sometime the same issue. I use Armbian and after the installation I configure Armbian and transfer the config to the bootloader (with armbian-config command)
By the way Ayufan released some new images since 2018