Remove striped screw

[pizzalovingnerd]

Desperate ?

  Perhaps use a heavy round tooth pick,  cut it in the middle to give a good surface area.

Use a small drop of super glue to secure the blunt end of the tooth pick to the head of the screw.

Allow plenty of time for the glue to "set-up"...  + ( the glue will dry fast on the tooth pick, but will take longer to dry on the metal screw )

Very carefully turn counter-clockwise and gently lift the screw.

Hope that helps

I let the glue sit for 2 hours and the touch pick came right off.