Super Mario case [NOW WITH UPDATED STL-FILE (April 27.)]

[Tarjei85]

Hey Captain, thanks for all the work you have done. I finally have time to start looking at this project. I looked at the latest repaired file and split it so I could work on it, side per side and I saw that I might run into some problems with 3d printing it, what type of supports do you suggest?
I was considering actually slicing each side in half, printing it and then gluing them together (that way the seem should be hardly noticeable). Is this what you would do or what do you suggest?

---

Oops, sorry, typo, it was meant to be hey Tarjei85 and later a thanks to Captain for the fixed file :-S

When it comes to 3D printing, I have no idea of how to approach this.
This model was originally made for CNC milling from a solid aluminium block (each side individually), but the cost is to high. (The price estimate I got was 31 000 NOK + material.) ($1 = ~8.3NOK)

If you come up with a good sollution for this please keep me in the loop so we can finetune this model and thread as much as possible