09-12-2020, 03:14 PM
Just a suggestion or rather asking if this has been already considered: a simple 3dof VR headset made by Pine64 that can work as a passthrough SteamVR device with outside in head tracking similar to the PSVR?
This open source project could be a starting point:
https://www.relativty.com/
Although I suspect it being easier to source the mechanical parts from one of the many Chinese cheap phone VR case vendors.
http://www.openhmd.net/ and Monado could be used software side.
And since Google made Cardboard VR fully open source it might be a good way to get some simple VR video watching or FPS drone flying working in stand alone mode via a RockPro SBC as a belt attached compute box?
Add some stereo cameras and it might even be possible to do some basic hand tracking or inside out head tracking in the future
Would be a cool addition to the growing Pine64 device ecosystem.
This open source project could be a starting point:
https://www.relativty.com/
Although I suspect it being easier to source the mechanical parts from one of the many Chinese cheap phone VR case vendors.
http://www.openhmd.net/ and Monado could be used software side.
And since Google made Cardboard VR fully open source it might be a good way to get some simple VR video watching or FPS drone flying working in stand alone mode via a RockPro SBC as a belt attached compute box?
Add some stereo cameras and it might even be possible to do some basic hand tracking or inside out head tracking in the future
Would be a cool addition to the growing Pine64 device ecosystem.
