Install Playstore on Android 9 image
(07-22-2020, 01:27 PM)boplinger Wrote: Thanks for these instructions.
I am running into the following issue:
I have a USB A/USB C cable with a USB C to USB A adapter plugged into an USB A extension cable from my PC to the Rock64. I have installed and am running "Platform Tools". I launch a PowerShell terminal and type "./adb devices", hit Enter, and get the following back: "List of devices attached", but nothing is listed.
Any ideas???
Thanks!
If you've verified that USB Debugging is enabled, next verify that your usb cable is plugged into the correct USB port on the ROCK64.
You may also want to use the actual USB-A side of your cable on the ROCK64 side, and ditch the adapter if your computer has USB-C. The USB-A is most important for the ROCK64 side, as the OTG port is the top-most one next to the NIC port, IIRC.
If you computer is running linux, you can also try using lsusb to verify that your computer is seeing the ROCK64 attached.
If worst comes to worst, you can check Develop options for ADB over Networking. That should allow you to use the ROCK64's IP to call it with adb.