07-07-2020, 09:27 PM
(07-07-2020, 01:35 PM)jwestman Wrote: This is not working for me, on my Braveheart PinePhone. Here's the dmesg output:*
Code:mobian ~$ dmesg | grep -E "(csi|ov5640)"
[ 1.425837] dovdd-csi: Bringing 3300000uV into 1800000-1800000uV
[ 1.428194] avdd-csi: Bringing 2900000uV into 2800000-2800000uV
[ 1.430261] dvdd-csi: Bringing 700000uV into 1800000-1800000uV
[ 4.172849] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL)
[ 8.972532] sun6i-csi 1cb0000.csi: creating ov5640 3-004c:0 -> sun6i-csi:0 link
[ 8.979971] sun6i-csi 1cb0000.csi: creating gc2145 3-003c:0 -> sun6i-csi:0 link
[ 9.918406] ov5640 3-004c: ov5640_init_slave_id: failed with -6
[ 11.526450] ov5640 3-004c: ov5640_init_slave_id: failed with -6
[ 39.310878] ov5640 3-004c: ov5640_init_slave_id: failed with -6
[ 40.475398] ov5640 3-004c: ov5640_init_slave_id: failed with -6
Camera shows a test pattern when I run it, indicating that no cameras are detected at all.
I flashed Mobian to my SD card from the mobian-pinephone-20200707 image, then upgraded using "sudo apt upgrade" (only one package, pinephone-tweaks, was updated), then restarted.
I also have a Brave Heart, I am still running from the SD card.
I downloaded the 20200707 nightly build, then installed to SD using etcher. (re-sized to max on 32gb San Disk card using 'disks' )
( The default setting is 'auto-update' but I do not think it did an update.)
The camera does 'just work' using GUI on my phone. It is low resolution, but pictures are not bad.
Any chance your privacy switches were changed ? I always look for the simplest answers first, then, work up from there.
Good Luck, BC