SSD for PBP

[MrTester]

The Intel 660p seems to be that unicorn; cheap and 0.1W according to https://ark.intel.com/content/www/us/en/...2-qlc.html . That power consumption seems shockingly low, so who knows how accurate it really is, but one would *think* that Intel knows how to measure it properly.

Thanks, it is only available in 2TB, 1TB, and 512GB.

Here is more information about the WD Blue SN500 which has a different edge-connector:

http://products.wdc.com/library/SpecShee...-00076.pdf

Here is more information about the WD Black SN750 NVMe SSD:

http://products.wdc.com/library/SpecShee...-00054.pdf

It looks like most manufacturers are using this https://bapco.com/products/mobilemark-2014/ or this https://bapco.com/products/mobilemark-2018/ which only runs on Windows.  If there is a similar testing application that runs under Linux on the PBP, that might help early SSD adopters share useful information.

Following this thread, and reviewing the datasheets with limited data (avg R/W in what Atemp, R/W load? ). My guesses we should have a "Best Bet" suggestions and all the early adopters run tests and/or extracts from Smart . 

Ill keep my eye on the price for Intel® SSD 660p @ $36 USD for 128 and $54 USD for 256 not bad for a give it a shot hardware. 
https://www.amazon.com/Intel-760P-256GB-...BL3T9&th=1