Serial Console for the Rock64

[jekohk]

A note on cp2102 is given in the post (#22), a little before this thread.
(https://forum.pine64.org/showthread.php?...2#pid36572)

> not sure why OP lists cp2102 as compatible.
> when SILabs's own specsheet says the max is 1mbps and most implementations max out at 921k.

---

Additional Information:
The description of the product you presented uses a mix of "cp2012" and "cp2102" in the chip name.
Perhaps "cp2012" is wrong and "cp2102" seems to be correct.

And the data sheet for "cp2102" is as follows
https://www.silabs.com/documents/public/...2102-9.pdf
And, as post #22 points out, "CP2102" supports only up to 1Mbps.

---

You need to select a product with a 1.5Mbps compatible chip.
For example, it is a product equipped with PL2303HX / CH340G etc.

ahh I see :/ I suspected this might be the case. 
Can anyone recommend a USB TTY connector that uses a compatible chip from Amazon/similar? Based on how long it took me to receive my initial RockPro64 board, I do not want to wait another 3 weeks for my USB TTY adapter to come from China or i'd just buy the one from the Pine store.