03-23-2019, 03:55 PM
Hi,
I just received my RockPro64 and unfortunately am getting no display out of HDMI when I boot. Thus i'm trying to communicate with it over serial to see what's going on.
I did not want to wait 2 weeks for the Pine USB to Serial adapter to arrive so I ended up buying this adapter from Amazon https://www.adafruit.com/product/954
Unfortunately i'm still unable to get any input on my terminal from the board. I connected GND->GND, RX->TX and TX->RX, verified the device connected on ttyUSB0 and ran minicom with the following settings: `sudo minicom -s -D /dev/ttyUSB0 -b 1500000` but nothing.
Any tips would be much appreciated!
I just received my RockPro64 and unfortunately am getting no display out of HDMI when I boot. Thus i'm trying to communicate with it over serial to see what's going on.
I did not want to wait 2 weeks for the Pine USB to Serial adapter to arrive so I ended up buying this adapter from Amazon https://www.adafruit.com/product/954
Unfortunately i'm still unable to get any input on my terminal from the board. I connected GND->GND, RX->TX and TX->RX, verified the device connected on ttyUSB0 and ran minicom with the following settings: `sudo minicom -s -D /dev/ttyUSB0 -b 1500000` but nothing.
Any tips would be much appreciated!