09-24-2018, 04:31 PM
Hello,
I got the following SATA controller card with the Marvell 88SE9230 chipset working: https://www.amazon.de/gp/product/B01ENKQ...UTF8&psc=1
The trick was to put pci=nomsi into the kernel boot parameters in /boot/extlinux/extlinux.conf
(also, before you start looking for driver errors for hours, check if your hard disks are actually working, a defective one cost me n hour of debugging today
)
I got the following SATA controller card with the Marvell 88SE9230 chipset working: https://www.amazon.de/gp/product/B01ENKQ...UTF8&psc=1
The trick was to put pci=nomsi into the kernel boot parameters in /boot/extlinux/extlinux.conf
(also, before you start looking for driver errors for hours, check if your hard disks are actually working, a defective one cost me n hour of debugging today
)