(09-06-2018, 01:36 PM)kuerious Wrote: The title says it all. On first boot, the console shows the following error more than once (at least twice):
Code:cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
Those "error" messages are "normal" at the moment - they certainly are not preventing anything working on my setup. Indeed I have no idea what they relate to.
Code:
$ dmesg | grep cdn
[ 1.673980] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 2.675993] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 4.696233] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 8.719568] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn(09-06-2018, 01:36 PM)kuerious Wrote: ... why, oh why, did the Pine64 team NOT include a power button on the power supply? There's no chance to press the small board button after you plug it in - it just boots.
Leave it plugged in and use the power button on the board?
PS - while trying to debug and get some confidence in the board would recommend you start with bionic minimal and go from there. Also use the ROCKPro64 wiki page as an index - for sure working from the Rock64 page will be confusing. http://wiki.pine64.org/index.php/ROCKPro...re_Release
- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
