09-06-2018, 03:29 AM
Hi there,
I had debian installed on the board for a few months and decided to run one of the scripts to update the u-boot spi.
After rebooting the board could not boot up anymore.
I tried to flush a new u-boot-flash-spi-rock64.img.xz image from the sd card but it could not get to the card at all.
I needed to short pins 20 and 21 to get to the card and the white light started flushing but keeps flashing for many hours without doing anything.
Used USB to TTL Serial UART RS232 Adaptor and I was able to see output on the screen but not anymore (connect black to 6, green to 8 and white to 10).
Looks like the board is bricked.
Any help would be greatly appreciated :-)
Cheers
I had debian installed on the board for a few months and decided to run one of the scripts to update the u-boot spi.
After rebooting the board could not boot up anymore.
I tried to flush a new u-boot-flash-spi-rock64.img.xz image from the sd card but it could not get to the card at all.
I needed to short pins 20 and 21 to get to the card and the white light started flushing but keeps flashing for many hours without doing anything.
Used USB to TTL Serial UART RS232 Adaptor and I was able to see output on the screen but not anymore (connect black to 6, green to 8 and white to 10).
Looks like the board is bricked.
Any help would be greatly appreciated :-)
Cheers