03-15-2018, 03:19 PM
I've been working on booting FreeBSD on the SOPINE on a Clusterboard. One issue I've run into is using the micro-usb port. I have a USB OTG cable, however FreeBSD is unable to detect when I plug a device in through it. On closer inspection of the schematic it appears the D+ and D- pins are backwards. I've modified a cable to swap these and found FreeBSD can now detect there is a device, although it is unable to talk to it, most likely due to the quality of my soldering.
Am I correct in thinking these pins are backwards on the Clusterboard?
Am I correct in thinking these pins are backwards on the Clusterboard?