02-08-2018, 03:00 AM
Same problem here...
I bought two of these emm 2 usb adapter for the previous rock64 emmc module i bought a few months ago. I have been unable to write any image on them. After a while, when writing the image file onto them, the write process stops, and etcher pop ups a message saying that he can't write to de module, and asks to re-try, test another module, try on another por, etc. I've tried all of them wihtout any luck...
That's what i've tried:
-Trying to write on 2 different emmc 32gb modules i bought with Etcher and Pine64 installer. No matter the combination between emmc modules and usb adapter i make, writing always stops suddenly (sometimes at 2%, sometimes at 40%, it can vary everytime i try tro write the image file)
-Tested both modules and both adapter on four different computers, with Windows 7, 8.1 and 10, without success.
-Tested to write different images from repository from Ayufan (xenial, jessie, OMV). No matter the image i choose, it always stop writing and giving the previous error
-Tested to disable everything on the computer mainboard. Disabling NIC adapter, Wireless, bluetooth, sound card, additional SATA controllers does not work at all
-Tested on different USB ports, from usb 2.0 to usb 3.0, always with the same effect: writing stops and gives an error
-Disabled power profiles on every computer tested, to set them at maximum performance. No success at all
-Disabled Windows UAC, created new user with administrative privileges, tried from differen hdd sources... Nothing worked
Besides this, i must say that every emms module has been previously tested, writing directly and android image on them through the Android Tool, and they worked ok, so the emmc modules are not the problem...
Opened a ticket and waiting for an answer, but it seems there must be a problem with the emmc to usb adapter, or at least with a batch of them...
I bought two of these emm 2 usb adapter for the previous rock64 emmc module i bought a few months ago. I have been unable to write any image on them. After a while, when writing the image file onto them, the write process stops, and etcher pop ups a message saying that he can't write to de module, and asks to re-try, test another module, try on another por, etc. I've tried all of them wihtout any luck...
That's what i've tried:
-Trying to write on 2 different emmc 32gb modules i bought with Etcher and Pine64 installer. No matter the combination between emmc modules and usb adapter i make, writing always stops suddenly (sometimes at 2%, sometimes at 40%, it can vary everytime i try tro write the image file)
-Tested both modules and both adapter on four different computers, with Windows 7, 8.1 and 10, without success.
-Tested to write different images from repository from Ayufan (xenial, jessie, OMV). No matter the image i choose, it always stop writing and giving the previous error
-Tested to disable everything on the computer mainboard. Disabling NIC adapter, Wireless, bluetooth, sound card, additional SATA controllers does not work at all
-Tested on different USB ports, from usb 2.0 to usb 3.0, always with the same effect: writing stops and gives an error
-Disabled power profiles on every computer tested, to set them at maximum performance. No success at all
-Disabled Windows UAC, created new user with administrative privileges, tried from differen hdd sources... Nothing worked
Besides this, i must say that every emms module has been previously tested, writing directly and android image on them through the Android Tool, and they worked ok, so the emmc modules are not the problem...
Opened a ticket and waiting for an answer, but it seems there must be a problem with the emmc to usb adapter, or at least with a batch of them...