pine64 failed after 6 months

[sjk]

Did the board go belly up? 

Thanks,
Scott.

What do you think ?

... I would try the latest image ( not pre release ) from ayufan (gnu+linux).  Please use a Samsung Class 10 32G Evo Plus card.   Power the board via the euler bus  pin(6  -ground)  pin(4  +5v).   5v @2.5A   2500ma.

Save the boot log from the serial console. 

Sometimes boards go bad;  happens.  Mine have run constantly for one year now;  however, I have heatsinks on the chip-set and I have a 5v controlled brushless fan over the SoC.

I have attached the boot log, is it not showing?


Sent from my XT1575 using Tapatalk

I want to see the boot log from the setup I described;  Samsung evo plus 32G card, powered via euler bus, running LINUX ...  latest release (ayufan, not pre release)...

I will try the latest release tommorow. I am using a 64gb Samsung (official) card.

As per the power supply, powering from the Euler bus is an option for a box on a bench. For me I need to move the unit around an run demos of streaming apps on it. I am using my rock64 for the moment.

I will order a new power adapter I can try on the Euler bus, but for me I would have to drill my machined aluminum case and add a barrel connector to make that work long term.

Sent from my Nexus 9 using Tapatalk