08-28-2017, 09:10 AM
That is also my ultimate goal but with a little difference - rock64 should replace my laptop motherboard.
My current specs, believe it or not, are
System: Host: linuslap Kernel: 3.13.0-24-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.8 (Gtk 2.24.23) Distro: Ubuntu 14.04 trusty
Machine: Mobo: N/A model: N/A Bios: Phoenix version: 4.06 date: 01/01/92
CPU: Single core Intel Pentium M (-UP-) cache: 1024 KB flags: (pae sse sse2) bmips: 2987.8 clocked at 1500.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1400x1050@56.1hz
GLX Renderer: Mesa DRI R200 (RV250 4C66) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0 ports: 1c00 18c0 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network: Card-1: Broadcom NetXtreme BCM5705 Gigabit Ethernet driver: tg3 ver: 3.134 bus-ID: 02:02.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Card-2: Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter driver: ipw2100 ver: git-1.2.2 bus-ID: 02:04.0
IF: eth1 state: down mac: <filter>
Drives: HDD Total Size: 40.1GB (80.4% used) 1: id: /dev/sda model: SAMSUNG_MP0402H size: 40.1GB
Partition: ID: / size: 36G used: 31G (90%) fs: ext4 ID: swap-1 size: 1.34GB used: 0.05GB (3%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 47.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 182 Uptime: 4:16 Memory: 737.2/1255.0MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
So, once I get my rock64 running as I like to have, I need to find driver board for my lcd and find out how to connect keyboard
and synaptics touchpad.
Greetings
Reinhard
My current specs, believe it or not, are
System: Host: linuslap Kernel: 3.13.0-24-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.8 (Gtk 2.24.23) Distro: Ubuntu 14.04 trusty
Machine: Mobo: N/A model: N/A Bios: Phoenix version: 4.06 date: 01/01/92
CPU: Single core Intel Pentium M (-UP-) cache: 1024 KB flags: (pae sse sse2) bmips: 2987.8 clocked at 1500.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1400x1050@56.1hz
GLX Renderer: Mesa DRI R200 (RV250 4C66) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0 ports: 1c00 18c0 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network: Card-1: Broadcom NetXtreme BCM5705 Gigabit Ethernet driver: tg3 ver: 3.134 bus-ID: 02:02.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Card-2: Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter driver: ipw2100 ver: git-1.2.2 bus-ID: 02:04.0
IF: eth1 state: down mac: <filter>
Drives: HDD Total Size: 40.1GB (80.4% used) 1: id: /dev/sda model: SAMSUNG_MP0402H size: 40.1GB
Partition: ID: / size: 36G used: 31G (90%) fs: ext4 ID: swap-1 size: 1.34GB used: 0.05GB (3%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 47.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 182 Uptime: 4:16 Memory: 737.2/1255.0MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
So, once I get my rock64 running as I like to have, I need to find driver board for my lcd and find out how to connect keyboard
and synaptics touchpad.
Greetings
Reinhard
