08-01-2017, 07:15 AM
(07-31-2017, 07:37 PM)pfeerick Wrote:(07-31-2017, 02:17 PM)Gnx Wrote: you can use several programs, win32diskimager, or etcher. you just use one of those programs to burn the image to the sd card.
pine wiki instructions:
http://wiki.pine64.org/index.php/Main_Pa...2F8.1.2F10
win32diskimager:
https://sourceforge.net/projects/win32diskimager/
Etcher:
https://etcher.io/
Don't think it's quite that easy Gnx... from what I remember of cztian's commentary on the IRC, the fedora image was on a USB drive, and he basically had a minimal image on the SD card, with something deleted, so that uboot skipped to the USB drive to look for the next boot option... hopefully someone can add a simple step by step, or a basic image that can be used. And maybe also a heads up as to if this worked in the end
And please consider linking to Rufus in the future instead of win32diskimager... as win32diskimager has zero verification abilities, so can't tell you if the medium is faulty. Rufus can at least run a check for bad blocks before it writes the image, and is handy have to have around for general formatting needs also.
There is only a uboot image on the SD card, and we can use setenv command to change boot order