09-13-2016, 10:18 PM
New board, same issue as the other one.
1) Pine64+ 2GB - Serial 410640138713 - Board 201-A64DB110-02 A64-DB-V1.1 2G C160358 04.12
2) RTL chip numbers: RTL8211E G3E16P1 GG12B
3) Router/Modem: Current switch is a GS105Ev2 managed switch - Prosafe Config utility says PINE is connected over 1000M, but PINE itself is basically non functional network-wise unless I switch the port on the switch to 100M
4) if you modded your board and made it work, how? N/A
5) if you swapped out your switch or router and made it work, what or which? N/A - have tried three different switches and different cables
6) if GbE is critical to your operation, please tell us how so? Used in NAS, large file transfers needed. Not critical but will be useful and is the reason I bought the PINE to replace my RaspberryPi 2.
7) provide any other additional 'data only' that might be helpful: The issue exists even locally between the PINE and my desktop connected on the same switch. No other connection needs to be factored in.
1) Pine64+ 2GB - Serial 410640138713 - Board 201-A64DB110-02 A64-DB-V1.1 2G C160358 04.12
2) RTL chip numbers: RTL8211E G3E16P1 GG12B
3) Router/Modem: Current switch is a GS105Ev2 managed switch - Prosafe Config utility says PINE is connected over 1000M, but PINE itself is basically non functional network-wise unless I switch the port on the switch to 100M
4) if you modded your board and made it work, how? N/A
5) if you swapped out your switch or router and made it work, what or which? N/A - have tried three different switches and different cables
6) if GbE is critical to your operation, please tell us how so? Used in NAS, large file transfers needed. Not critical but will be useful and is the reason I bought the PINE to replace my RaspberryPi 2.
7) provide any other additional 'data only' that might be helpful: The issue exists even locally between the PINE and my desktop connected on the same switch. No other connection needs to be factored in.