I just burned my board

[MarkHaysHarris777]

Thanks. I also guess so.  I have ordered another (2G) and till then I will work with my raspberry pi3.

Is there not a voltage regulator on the pine? Surely since this is a processor board it would need a stable and regulated power supply. Probably burned that out and can probably be replaced. If you can't figure it out, send it to me :-D

The Pine64+ Rev C Schematic is available now ( thanks TL Lim ) and you can take a look at what probably got burned out.

Its possible that the wpm1481 was blown, or that the mt3608 was blown, but more like the PMIC (AXP803) was blown---  or all three !  Depends whether the battery was plugged in, and what the setting of the 5v|batt jumper was at the time of the indescretion. And of course as components give way (sometimes like a stack of dominoes) secondary and tertiary compents fall as well... so , its anybody's guess how badly its damaged. My best guess is that the AXP803 is toast.