06-30-2016, 09:07 AM
(06-30-2016, 08:53 AM)Oscar Wrote:Well that is the $120 dollar question isn't it? I'm from the old school, and 'we' never hot-plug anything (not ever) and 'we' have not had anything damaged as a result either... I have a very inexpensive wireless keyboard (usb receiver) that I use with my Pine and PIs. I change the receiver only with the power off. I would never plug a $120 dollar keyboard into a PI, nor the PineA64. IMHO its insane to treat a $120 keyboard that way... and the proof is in the pudding, isn't it... his keyboard IS damaged (one way or the other) so, it was insane, wasn't it?(06-30-2016, 07:54 AM)MarkHaysHarris777 Wrote: The K70 is probably sensitive to being hot-plugged. If you open it up you'll probably find it has (1) chip. ... and it probably isn't well protected. More likely than not hot-plugging the keyboard is what damaged it. The other possibility is ESD; which also has the potential for damaging any uncased board like the PineA64, or the Raspberry PI... for that matter.
But two things: 1) plugging a $120 keyboard into an open SBC is insane; and 2) blaming keyboard damage on the engineering efforst of the Pine team is no fair, especially without proper testing nor corroboration.
1) plugging in a USB complaint device into a USB compliant socket [is] not insane ...
Compliant, non compliant, meh. If you value your equipment, you will not hot-plug it... ever.... physics does not understand compliance...