06-29-2016, 11:20 PM
(06-29-2016, 04:52 PM)tllim Wrote:(06-29-2016, 12:37 AM)KaranP Wrote:(06-28-2016, 08:17 PM)tllim Wrote:I have a very similar issue. My board turns on with HDMI connection, however it only stays on for ~15 seconds before the LED light resets and then it reboots. This process keeps over and over again till I disconnect the power source.(06-28-2016, 04:50 AM)selcar Wrote:(06-27-2016, 09:42 PM)tllim Wrote: The red LED directly link to power input, please check your power supply or try another one.
It does the same with other cables and power supplies that I have.
Sounds like some place short circuit and cause the power supply trigger the protection. Please PM me and I will make a replacement.
I bought the cable accessory and charger accessory. Both produce the same result. Do I have a defective board or am I just missing something?
If stays on 15 seconds, this means the board is not short circuit taht cause power supply protection kick in immediately. From description, I don't think your board is defective, check the power supply and make sure current rating is 2A above and not a "smart" one.
Whats a "smart" charger? I only use the chargers I ordered as accessory from the website. I ordered the cable, and the wall charger. Both produce the same result. I have tried plugging the USB cable into regular wall chargers, iPad charger, and Ps4. Same results are produced. I have plugged the wall charger provided in many different outlets, again the same results.
Appreciate the response.
Thanks