Power switch circuit

[pine.tree]

When you guys say 'switch' ... do you mean the physical component that toggles?

So... the on/off switch of the classic Gameboy serves this purpose, and no additional component is needed to make use of on/off functionality?

Yes, the physical switch where you can turn on / off the Pine.
Currently on the board, there are connections for it, but no physical switch soldered on.

It was supposed to come as a stretch goal reward but there were some people who were negative about having the switch, thus it is now dangling in the air.

I don't see why they cannot have the switch there, and just leave it in the 'on' position if they do not want to use it?
I would love to see the switch there, so that I can turn on/off the Pine as and when I want, rather than pulling the power cable off... 

I definitely agree. A switch would be great, i would love not to have to pull out cords or something, just a little flick of a switch is what i would prefer. If Pine decides not to include a power switch, you can always take a broken flashlight apart and use the click switch

I believe the switch that's on the board is actually a momentary contact that's connected to the PMIC.  A short press of the switch when the system is running generates an interrupt to the SoC from the PMIC, causing a soft power off with a graceful system shutdown.  A long hold (16 secs according to the AXP803 PMIC datasheet) forces the PMIC into a powered-off state, where it just shuts off the power to everything.

Pressing the power button when the board is off powers on the PMIC, which powers up all the devices on the board.

Ah, that would be great. I forgot about the ability to either force shutdown or "gracefully" shutdown the device. I certainly wouldn't want to abruptly cut power, shutting down properly is good. If they do the momentary contact switch, 10/10.