How to eraese defekt SPI ?

[linuxfreund]

There's no specific "SPI_New.bin, but most use TowBoot since it's the easiest to flash to the SPI, with their installer image that you can boot from an SD

Thanks, but with Towboot there is the same problem with "sf probe". So I think the SPI is broken. I had to leave SD Card with U-Boot while poweron the Laptop, no problem.

Or it's possible to flash the SPI on the EMMC ? That's my boot device for Fedora, while /home is on NVME.

Thanks
Andreas

lpddr4_set_rate: change freq to 400MHz 0, 1
Channel 0: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 800MHz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2023.07 (Oct 25 2023 - 00:00:00 +0000)
Trying to boot from MMC2
spl_load_fit_image: Skip load 'atf-6': image size is 0!


U-Boot 2023.07 (Oct 25 2023 - 00:00:00 +0000)

SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM:  4 GiB (effective 3.9 GiB)
PMIC:  RK808  
Core:  320 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... jedec_spi_nor flash@0: unrecognized JEDEC id bytes: ff, ff, ff
*** Warning - spi_flash_probe_bus_cs() failed, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Model: Pine64 Pinebook Pro
Net:   No ethernet found.
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe800000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe800000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
      scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0