06-12-2016, 09:19 AM
Hi, I don't want to be one of those mic-dropping whiners, so I'll try to post a few details here.
2GB model connected via a fairly short yellow CAT-5E cable to a TP-Link WDR4300 running OpenWRT BARRIER BREAKER (14.07, r42625). Doesn't get any network connection in either Android build (regular or rooted). Very slow, but working, in the xubuntu longsleep build. After running the ethtool command from this thread, I get good network speed. OpenWRT shows a 100BT connection on that port; 1000BT everywhere else, including this laptop which is connected via an identical CAT 5E cable (although also via a patch panel etc).
For power, I'm using a 5W 2.5A power supply intended for an RPi3, via the micro USB port.
I didn't benchmark, but from my perspective, if I could put Android into a 100BT mode, it would serve my needs just fine. As such, I'll try to borrow a 100BT switch in a week or two and see if that helps. If there's an android equivalent of the ethtool command that I can perform on Android, I'd very much appreciate hearing about it!
Feel free to PM me for more deets or if there's anything I can try that might help diagnose the issue.
2GB model connected via a fairly short yellow CAT-5E cable to a TP-Link WDR4300 running OpenWRT BARRIER BREAKER (14.07, r42625). Doesn't get any network connection in either Android build (regular or rooted). Very slow, but working, in the xubuntu longsleep build. After running the ethtool command from this thread, I get good network speed. OpenWRT shows a 100BT connection on that port; 1000BT everywhere else, including this laptop which is connected via an identical CAT 5E cable (although also via a patch panel etc).
For power, I'm using a 5W 2.5A power supply intended for an RPi3, via the micro USB port.
I didn't benchmark, but from my perspective, if I could put Android into a 100BT mode, it would serve my needs just fine. As such, I'll try to borrow a 100BT switch in a week or two and see if that helps. If there's an android equivalent of the ethtool command that I can perform on Android, I'd very much appreciate hearing about it!
Feel free to PM me for more deets or if there's anything I can try that might help diagnose the issue.