09-25-2023, 12:50 AM
For your setup you might find useful information here:
https://git.sr.ht/~chrichri/RockPro64_u-...RAID_howto
If your SATA controller is supported by u-boot you could finish your setup without serial console, but I'd strongly advice to be ready for failure in which case debugging via serial would be needed. Reverting to a boot from sdcard/eMMC works without serial console by disabling SPI via jumper.
https://git.sr.ht/~chrichri/RockPro64_u-...RAID_howto
If your SATA controller is supported by u-boot you could finish your setup without serial console, but I'd strongly advice to be ready for failure in which case debugging via serial would be needed. Reverting to a boot from sdcard/eMMC works without serial console by disabling SPI via jumper.