"bricked" my eMMC
#1
Bug 
Had many issues with the original Manjaro OS on my pppro, such as pgp keys not properly authenticating etc. after some long troubleshooting I decided to install a fresh image to my eMMC from an SDcard. During the flashing of the eMMC, the phone crashed, and the flashing was interrupted.
Now whenever I boot, it is IMPOSSIBLE to boot from SD card without bypassing eMMC with the RE button (I used to have tow-boot, which allowed me to use the volume down key and this no longer works) No matter my timing I never seem to be able to boot with the eMMC initialized. It never shows up in "lsblk" and therefore I cannot re-flash the drive to a complete install.

Quick note about tow-boot: it does seem to still exist as I get a brief blue flash before some kind of (what seems to be a) hard override of my input

I ran the dd command as per usual when the phone breaking crash happened, nothing fancy.

Anything I can do to access the eMMC from my computer?
Can I use a USB-C keyboard to boot the phone from SDcard? (I don't have one at my disposal so I haven't had the chance to try)
Any other ideas? Huh Huh Huh 

Thanks in advance to anyone with the knowledge to help me out of this mess
  Reply


Messages In This Thread
"bricked" my eMMC - by tigerbalm69 - 05-08-2023, 11:03 PM
RE: "bricked" my eMMC - by mikehenson - 05-09-2023, 07:22 AM
RE: "bricked" my eMMC - by tigerbalm69 - 05-09-2023, 09:05 AM
RE: "bricked" my eMMC - by fxc - 05-09-2023, 10:46 AM
RE: "bricked" my eMMC - by tigerbalm69 - 05-09-2023, 11:09 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Flashing to the eMMC prairie33 4 3,429 06-18-2022, 04:49 PM
Last Post: fxc
  Flash Pinephone Pro image from SD card to eMMC? jcun4128 9 8,507 03-11-2022, 09:09 AM
Last Post: fxc
  Guide: Recovering from not being able to boot to eMMC or working sdcard Ulfnic 2 3,204 02-02-2022, 10:29 PM
Last Post: bcnaz

Forum Jump:


Users browsing this thread: 1 Guest(s)