PureTalk work with Pinephone?
01-30-2023, 12:05 AM
I finally got my Pinephone working!! It did turn out to be an issue with the APN settings.
Running the following command got me a working phone: voice, cellular data, sent and received messages and SMS/MMS all tested to work.
mmcli -m 0 --3gpp-set-initial-eps-bearer-settings="apn=RESELLER,ip-type=ipv4"
As soon as I entered that command 4G showed up by the cell signal icon. Under modem status: carrier now shows AT&T, network type is lte, network status is registered.
This drove me crazy, glad I finally figured it out hope this helps someone else.
This is on Manjaro 6.0.3-1, which IIRC I used this OS to have working AT modem commands. I assume I could have gotten other OS(s) to work the same way. Gonna try out Manjaro for the time being.
Running the following command got me a working phone: voice, cellular data, sent and received messages and SMS/MMS all tested to work.
mmcli -m 0 --3gpp-set-initial-eps-bearer-settings="apn=RESELLER,ip-type=ipv4"
As soon as I entered that command 4G showed up by the cell signal icon. Under modem status: carrier now shows AT&T, network type is lte, network status is registered.
This drove me crazy, glad I finally figured it out hope this helps someone else.
This is on Manjaro 6.0.3-1, which IIRC I used this OS to have working AT modem commands. I assume I could have gotten other OS(s) to work the same way. Gonna try out Manjaro for the time being.
