08-12-2022, 01:29 PM
make sure you connect the ground pin and set the baud rate to 1,500,000. The serial adapter you use also matters, as does keeping the serial wires short and away from any power lines, apparently the model B is less nice about logic signals or something. A CH340G based adapter like the PINE64 "Woodpecker" will work.
Occasional Linux Kernel Contributor, Avid Wiki Updater, Ask Me About Quartz64
Open Hardware Quartz64 Model A TOSLink Adapter
Pi-bus GPIO Extender For ROCKPro64 And Quartz64 Model A
Plebian GNU/Linux
