Has anyone switched to the userspace keyboard driver on Manjaro ARM?

[Hook]

Okay, here is what finally worked for me.  I started with MajaroArm with all updates.  I also installed from the software app (Phosh) pinephone-keyboard-git and pinephone-toolkit-git, which may have helped.  I did not have to do any building of the userland driver, so an update may have already provided it, or maybe one of the git files I mentioned. Whatever, it already existed at the proper location when I started this.



Here are all of the exact steps I took:

1. Create systemd file

  a. Navigate  to /etc/systemd/system

  b. sudo nano keeb2.service (use whatever name you like before the ".service")

  c.In file, type:

 

  [Unit]
  Description=PinePhone keyboard userspace daemon
 
  [Service]
  Type=simple
  ExecStart=/usr/bin/ppkb-i2c-inputd
 
  [Install]
  WantedBy=multi-user.target
 
 
d. Save and exit Nano

 
2. Enable service for next boot

  a. Run: sudo systemctl enable keeb2.service


3. Set up boot.txt file to disable kb151

  a. cd /boot

  b. sudo nano boot.txt

  c. Type kb151.disable_input at the end of setenev bootargs line (there should be one space between last parameter in the line and this addition).

  d. save and close.


4. Create the new boot.scr from the boot.txt file to apply disabling kb151 at next boot.

  a. Run: /usr/bin/pp-uboot-mkscr

 

5. Reboot

This worked for me with MajaroArm. I have F1-F10 working with the pine key, and Fn-num keys actually type what is printed on the lower part of the keys.

I potched this together from different sources, (the link in the first post and the very helpful comments in this thread) and a lot of exploring to see where files were actually located and if I had them.  Many thanks to @Megamemnon and @neil_swan80, as well as another not on this forum.  And, of course, thanks to the ManjaroArm devs.

Hope this helps someone else.

Hi,

it was helpful, and it stopped working scince last manjaro update for me ... is it the same for you ?

No, still working fine here.