(03-07-2022, 12:34 PM)x893 Wrote: Hi,
today i build images (i have SD only) for SOQuartz and Quartz64-A but not check in depth.
I add issue for io-domain.sh to your github repository.
May be helpful to everyone.
Later check images with hardware.
Yes, some mistakes presents in schematics - VCCIO5 for SOQuartz abd Quartz64.
May be you know about ability to use X88 Pro 20 (8Gb/64Gb) as hardware for Ubuntu (can't found schematics for X88 Pro :-( )?
Do you have a soquartz ? , cool would be nice if you can test that it is a rk356x
check for sure to check the dts file a pinenote would be little trickier with the waveform img of diffrent panels .!!
for the x88 you have to extract the dtb of the device or firmware and convert it to a dts it is little time consuming but possible
proberly it is based on the rk3566_box_v10 dts
shematics would be handy but with opening the box and take good pictures of the pcb will get a good impression of the hardware used
wifi is same ap6255
cant see the pmic if there is one ?
for example the pmic a rk817 or a rk809
and a uart console to see what uboot and kernel does
you could try to use the dtb of your device with a image with a 4.19 kernel like the one from mara
https://dl.slarm64.org/slackware/images/quartz64/
or without a dtb and mainline
https://github.com/warpme/minimyth2/blob...6-x6.patch
here look how someone did it with a pinenote
https://github.com/DorianRudolph/pinenotes
or to convert it to a dts
https://github.com/Ralim/hacking-pinenot...deviceTree