03-09-2022, 11:37 PM
(This post was last modified: 03-10-2022, 01:08 AM by CanadianBacon.
Edit Reason: Add Attribution, Improve Message
)
Hey, sorry about the long hiatus, I've just been able to get around to working on this again.
I've got OpenWRT running on the Rock64.
My branch is at https://github.com/CanadianBaconBoi/openwrt/tree/rock64. These changes are from "lucize", I just ported them to a newer openwrt version. Original source here.
Issue is that you have to compile all of the packages you need at build time because it's running kernel version 5.10.103
In light of this I have compiled all packages against kernel 5.10.103 and created a repo at openwrt.cdnbcn.net.
These packages will be linked so you can host your own repo too
.
You will have to modify the file "/etc/opkg/distfeeds.conf" in openwrt and swap them out for my or your repo.
Attached is also a build config so you can recreate the SD card image with the source from my repo without having to configure the image yourself.
Just copy the file to your <buildroot> and rename it to ".config".
All packages are confirmed working with the attached image. I hope I can help some people out with this.
Source Repo: https://github.com/CanadianBaconBoi/openwrt/tree/rock64
SD Card Image: https://drive.google.com/file/d/10hqytuL...sp=sharing
Build Config: https://drive.google.com/file/d/1BhI6juX...sp=sharing
Custom Repo: http://openwrt.cdnbcn.net
Repo Packages: https://drive.google.com/file/d/1tJC3kNy...sp=sharing
I've got OpenWRT running on the Rock64.
My branch is at https://github.com/CanadianBaconBoi/openwrt/tree/rock64. These changes are from "lucize", I just ported them to a newer openwrt version. Original source here.
Issue is that you have to compile all of the packages you need at build time because it's running kernel version 5.10.103
In light of this I have compiled all packages against kernel 5.10.103 and created a repo at openwrt.cdnbcn.net.
These packages will be linked so you can host your own repo too
.You will have to modify the file "/etc/opkg/distfeeds.conf" in openwrt and swap them out for my or your repo.
Attached is also a build config so you can recreate the SD card image with the source from my repo without having to configure the image yourself.
Just copy the file to your <buildroot> and rename it to ".config".
All packages are confirmed working with the attached image. I hope I can help some people out with this
.Source Repo: https://github.com/CanadianBaconBoi/openwrt/tree/rock64
SD Card Image: https://drive.google.com/file/d/10hqytuL...sp=sharing
Build Config: https://drive.google.com/file/d/1BhI6juX...sp=sharing
Custom Repo: http://openwrt.cdnbcn.net
Repo Packages: https://drive.google.com/file/d/1tJC3kNy...sp=sharing
