New PinePhone died after first WiFi setup
03-03-2022, 11:40 AM
That is on the regular PinePhone and not the Pro, right? It is possible your phone is simply fully drained, in such a case it won't boot with just a few exceptions: One of the exceptions is Jumpdrive, so I would recommend you to flash Jumpdrive on the microSD card if you're using the regular PinePhone and to boot from that, while having the USB-C cable connected to a wall charger: https://github.com/dreemurrs-embedded/Ju...one.img.xz
Make sure the microSD card is in the top slot and inserted all the way. Make also sure you're flashing the whole microSD card and not the first partition on it (things like "/dev/sdc1" are wrong!). If that boots fine let it charge for a few hours while Jumpdrive is running.
Please join the community chat for further debugging and questions, see https://wiki.pine64.org/wiki/Main_Page#Chat_Platforms.
Make sure the microSD card is in the top slot and inserted all the way. Make also sure you're flashing the whole microSD card and not the first partition on it (things like "/dev/sdc1" are wrong!). If that boots fine let it charge for a few hours while Jumpdrive is running.
Please join the community chat for further debugging and questions, see https://wiki.pine64.org/wiki/Main_Page#Chat_Platforms.