02-02-2022, 06:24 PM
Hello everyone,
After a long wait (to be able to order and then to receive it), I finally received my PinePhone Pro.
PinePhone Pro Developer Edition.
Developer Edition is delivered with an Android 9x for testing.
I think do some tests (call, sms) before changing the OS.
I was happy to receive my pinephone pro, but my happiness has been short-lived.
The SIM card was blocked (in the sim slot) and with a lot of difficulty I have remove this.
I suspect the connection paws that touches the SIM card to have been damaged.
If the phone start with a Sim card, I have an error of the " com.android.phone " application in a loop, and phone reboot.
Impossible to pass or receive a call, but I can see the Network GSM Name.
After doing some research (fourm, youtube, etc), I read a lot of message about design of Micro Sim Slot (who could be better conception)
But in the present what interests me is to find a solution.
According to this page, for PinePhone :
https://wiki.pine64.org/wiki/PinePhone_c...CADD.2FUSB
The componant is " J901: SA-2202-112 25-pin Micro-SIM and TF slot "
But for Pinephone Pro, and when we look at the pictures it seems that it is a little different.
If you have suggestions thank you for telling me... !?
PS : I have make a request to Sales Team (by mail), they redirected me to their support service (i'm waiting answer).
After a long wait (to be able to order and then to receive it), I finally received my PinePhone Pro.
PinePhone Pro Developer Edition.
Developer Edition is delivered with an Android 9x for testing.
I think do some tests (call, sms) before changing the OS.
I was happy to receive my pinephone pro, but my happiness has been short-lived.
The SIM card was blocked (in the sim slot) and with a lot of difficulty I have remove this.
I suspect the connection paws that touches the SIM card to have been damaged.
If the phone start with a Sim card, I have an error of the " com.android.phone " application in a loop, and phone reboot.
Impossible to pass or receive a call, but I can see the Network GSM Name.
After doing some research (fourm, youtube, etc), I read a lot of message about design of Micro Sim Slot (who could be better conception)
But in the present what interests me is to find a solution.
According to this page, for PinePhone :
https://wiki.pine64.org/wiki/PinePhone_c...CADD.2FUSB
The componant is " J901: SA-2202-112 25-pin Micro-SIM and TF slot "
But for Pinephone Pro, and when we look at the pictures it seems that it is a little different.
If you have suggestions thank you for telling me... !?
PS : I have make a request to Sales Team (by mail), they redirected me to their support service (i'm waiting answer).
