PINE64   ›   ROCKPRO64   ›   RockPro64 Hardware and Accessories   ›   M.2 SSD not visible when connected via PCI-e board

M.2 SSD not visible when connected via PCI-e board
dukla2000
Professor of The Pine
*****
Joined: Jul 2018
Posts: 809

Reputation: 100
#3
01-18-2022, 01:42 PM
(01-17-2022, 04:17 PM)jimh227 Wrote: ...
  • WD Blue 3D NAND SATA M.2 2280 SSD, 1TB
...

Please be aware that the Pine64 SSD interface card is intended for use with NVMe devices. These can be identified by the fact they have a single (Key M) notch, e.g. the WD Black devices.  While M2/NGFF SATA devices (with a Key B notch, typically have Key M as well) will physically fit, they will not work. e.g. WD Blue devices.
  • PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
  • PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
  • ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade
  Reply


Messages In This Thread
RE: M.2 SSD not visible when connected via PCI-e board - by dukla2000 - 01-18-2022, 01:42 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  How do you connect PWM fan (3/4 pins) to this board (2 pin fan connector)? aleksei 3 9,310 11-19-2020, 04:35 PM
Last Post: Gienek
  Won't boot with 2.5GBe PCIe adaptor connected voltagex 1 3,466 10-20-2020, 12:22 PM
Last Post: xmixahlx
  Getting 12v from the board domih 2 4,760 06-14-2019, 08:02 PM
Last Post: domih
  PCI-E Graphics Board Possible? Diesel141 1 3,241 04-23-2019, 12:13 AM
Last Post: Bullet64
  Discovered issues with PCIe NVMe & GPU Load in desktop 4.4.174 causing board lockup axelf 0 2,383 04-08-2019, 03:51 PM
Last Post: axelf
  Defect board? buskmann 2 4,221 02-16-2019, 12:27 PM
Last Post: buskmann

Forum Jump:


Users browsing this thread: 1 Guest(s)