My PinePhone does not read SD card

[asasani]

I appreciate the help.

OK so I have followed the instruction and run dmesg --follow
It printed bunch of logs and then stopped. There are some errors among the logs but I am not sure if they are related to the sd card issue.

Anyway then I started to insert and remove the sd card while running the phone and nothing happened. I also tried to wiggle it. and still noting.
But then I applied pressure from the top when the card contacts should be and dmesg started to print

[ 91.327692] sunxi-mmc 1c0f000.mmc: no support for card's volts
[ 91.327755] mmc0: error -22 whilst initialising SDIO card
[ 92.351857] sunxi-mmc 1c0f000.mmc: no support for card's volts
[ 92.351920] mmc0: error -22 whilst initialising SDIO card
[ 94.399533] sunxi-mmc 1c0f000.mmc: no support for card's volts
[ 94.399592] mmc0: error -22 whilst initialising SDIO card
[ 98.497900] sunxi-mmc 1c0f000.mmc: no support for card's volts
[ 98.497963] mmc0: error -22 whilst initialising SDIO card

---

I am going to try other cards but so far I only have 64G Sandisk