How do I even turn that thing on?

[bosi564]

So I managed to purchase a serial USB thing from Amazon (not really identical to the Woodpicker, this one has a few more pins).
The problem is this:
https://video.076.ne.jp/w/9uYyN89abqg4nRDNUHhnwR

Any way to ANALyze this problem (at least, if it is a problem at all)?

So I ASSume nobody knows.

It's similar to RockPro64: https://wiki.pine64.org/wiki/ROCKPro64#S....28UART.29 and from artictle there's a link to actual instructions: https://forum.pine64.org/showthread.php?tid=6387

It works, but you should read the instructions carefully.

The things I missed were the following:
- DON'T attach all the wires before boot. One of the wires (for sending data) is attached last.
- The connection is described from the point of view of the Quartz64 computer, so refer to https://wiki.pine64.org/wiki/Quartz64#GP...Model_A.29

Otherwise the computer works. I ran the Manjaro setup using the serial console and after setting ssh I ran some tests to see if it works. Mine seems  like a good candidate for a miniserver so far