Hi,
I'm about to order the Rock64 for a NAS project.
I'm going to build the Rock64 inside a 4bay case (like Chenbro SR30169 or similar).
I made a schematic how I thought to build it.
![[Image: 8TdCzq.png]](http://imageshack.com/a/img922/3852/8TdCzq.png)
*Edit 15-09*
After knowing i don't need a GigabitEthernet adapter i have redisgn my model :
![[Image: PQeIxw.png]](http://imageshack.com/a/img924/9206/PQeIxw.png)
for the USB3.0 to SATA (RAID) i'm thinking about this one : Oodelay USB 3.0 & eSATA 6Gb to x2 SATA 6Gbs RAID 0/1/JBOD Bridge Board (UB203RM)
for the USB2.0 to sata i'm thinking about this one : USB to IDE SATA 2.5 3.5 Hard Disk HDD Cable Converter LW
Wire'ing is no problem since i'm an elektrician![Smile Smile](https://forum.pine64.org/images/smilies/smile.png)
Hoop to hear your guys advice en tips
I'm about to order the Rock64 for a NAS project.
I'm going to build the Rock64 inside a 4bay case (like Chenbro SR30169 or similar).
I made a schematic how I thought to build it.
Code:
Because I'm going to use the nas most of all for internal file transfer (SAMBA) I really wanted to integrate GigaEthernet.
But I'm not sure to place the GigaEthernet adapter on a USB3.0 or USB2.0 port (and dedicate the USB3.0 port only for the USB3.0-->SATA)
*****The ethernet port on the Rock64 is already a Gigabit port ... :D
![[Image: 8TdCzq.png]](http://imageshack.com/a/img922/3852/8TdCzq.png)
*Edit 15-09*
After knowing i don't need a GigabitEthernet adapter i have redisgn my model :
![[Image: PQeIxw.png]](http://imageshack.com/a/img924/9206/PQeIxw.png)
for the USB3.0 to SATA (RAID) i'm thinking about this one : Oodelay USB 3.0 & eSATA 6Gb to x2 SATA 6Gbs RAID 0/1/JBOD Bridge Board (UB203RM)
for the USB2.0 to sata i'm thinking about this one : USB to IDE SATA 2.5 3.5 Hard Disk HDD Cable Converter LW
Wire'ing is no problem since i'm an elektrician
![Smile Smile](https://forum.pine64.org/images/smilies/smile.png)
Hoop to hear your guys advice en tips
![Smile Smile](https://forum.pine64.org/images/smilies/smile.png)