01-28-2022, 03:19 PM
(This post was last modified: 01-28-2022, 03:22 PM by jabadahut91.)
I received my pinephone keyboard a few days ago and I've never been able to get it to charge. I have mobian installed, they keyboard works, but the battery doesn't charge. After enough time it completely kills the phone and I have to disconnect the phone in order to charge it. Any Ideas? They keyboard does not work with my brand new pinephone pro at all.. I tried pushing the back in like some users have said to do, this does not fix my issues.
I though i saw something that said we needed to install a firmware update on the keyboards because they didn't come with it, but I haven't been able to find it? Am I mistaken?
I have not seen any available firmware 'updates' for the keyboard yet, --> BUT I did mention the keyboard "Needing a firmware update" in another thread.
I have got limited use of the keyboard on a PMOS Convergent (Revision 1.2a) phone with Mobian/Phosh recent release w/updates on an sd card.
To get it to charge ---> I plug it in first to the charger, then turn off the phone. ---> if you connect or disconnect the charger, it will cause the phone to turn-on.
(( I do find the phone charges faster when I use the Pinephone Convergence Dock in-line with the charger. Power app shows it is charging @ up to 5.5+ watts
when using the Pine docking bar.))
*** Although the phone needs to be turned off for the keyboard to actually "Charge" ! (for now)
So while the new keyboard is "fun to play with", ---> I would NOT recommend using it on your daily use phone.......Yet.
Just my experience, Your experience could vary.
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
I am typing on a keyboard showing 100% charge. I put it on charge yesterday and then shut the phone down and left it to charge. Mine phone just seems to discharge at something similar to the normal rate when the charger is plugged into the keyboard. Even though the battery icon is showing the charging symbol. So a similar situation as described by bcnaz. I installed the mobian weekly build dated 16.1. It is almost as if plugging the charger in causes the phone/keyboard battery to discharge.
Ah after 15 minutes of uptime the battery is still showing 100% but the battery charging symbol has appeared in the battery level icon.
The 'Power Supply' app. - " thinks the charger is plugged in" when the keyboard battery is feeding the phone battery... or so it seems ?
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
01-29-2022, 02:47 AM
(This post was last modified: 01-29-2022, 03:20 AM by grump_fiddle_reinstall.)
Still showing 99%. The charging symbol in the battery icon has just reappeared.
OK the charge now seems to be dropping at a more normal PinePhone speed. In the last half hour it has dropped to 87%. Still running the hotspot, and in use as earlier in the day. The PinePhone has been on for around 5 hours.
I will try charging it later leaving the phone on and using what I think is the best charger I have.
01-29-2022, 04:12 AM
(This post was last modified: 01-29-2022, 04:13 AM by grump_fiddle_reinstall.)
After about 6 hours of use the charge shows 53%. I have left the phone on and started charging the keyboard. I will check it in an hour or so.
Hotspot still on browser open but I have stopped streaming music in VLC.
After an hour or so connected to the USB-A port on a PD+QC charger it shows 25%.
Ah, right the USB-A port is only rated at 2A. The PD+QC port at 3A. Switching to another charger.