dwmmc_rockchip fe320000.mmc: Unexpected CMD11 timeout
#1
Trying to install slackwareaarch64 on pinebook pro, following well documented video and web page, I have installed slackwareaarch64 on 3 rockpro64 successfully. This is one of the newer(?) PBP will itty bitty emmc switch.

Installed slackware u-boot, this boots but cannot find slackware installer on sd card in sd card slot.

dmesg shows

Quote:[ 3026.994975] mmc1: Skipping voltage switch
[ 3027.001231] mmc1: error -5 whilst initialising SD card
[ 3027.024964] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 3027.062065] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3027.101480] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 3027.434979] dwmmc_rockchip fe320000.mmc: Unexpected CMD11 timeout

this is same output from dmesg booting manjaro and inserting same sd card in sd card slot

this is a new 
SanDisk Ultra 32GB UHS-I/Class 10 Micro SDHC Memory Card and I've tried 64GB also.

Using the same sd card with slackware installer in a usb sd card reader, the slackware installer will load the system.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  NVMe timeout when booting from eMMC but not SD satwell 5 6,826 10-29-2021, 07:41 AM
Last Post: psstoev

Forum Jump:


Users browsing this thread: 1 Guest(s)