Hi, i plugged in power, but its blinking.. is this normal?
first time plugged into power
I'd assume the green power LED on the SBC, but you know what they say about assuming anything!
You'd assume correctly. What PSU / Power cord are you using ?
I m using one from pine64.org, 5v3a
first time plugged in
initially all 3 led blinks
stats, pwer, and dc-in
today only the dc-in is blinking
this is with and without any sd/emmc plugged in.
so i m at a lost for word..
i received the board on 0ct 13, foudn i need power, so check locally and none car 5v3a (the 3a output was the problem, none carry here and highest i see for 5v is 1.2a)
i order one on oct 21, it just came last night.
using pine installer, etcher - for the sd card with image for debian and android stock 7.12, both does nothing (initially all 3 lights blinks - this is after waiting close to 20minutes.)
borrowed a usb-a male/male , jumpered it, and plug the emmc in, plug the power in (after installing driver )
and open android tool--- could not detect it.
right now if i plug in the power, i get a dc-in led blinking only.
PSU from pine64.org
led form
stats.power and dc-in are blinking.
