how to enable /dev/i2c-0 on 0x64

[donadams]

Hi All, I've ran through this tut https://wiki.pine64.org/wiki/Ox64 and flashed my board. Along the way I enabled the i2c options in the buildroot menu but I don't see "/dev/i2c-0 " when booted. I also don't see i2c kernal msgs (not sure if there should be?). i2ctools is installed.
Wondering if anyone knows what the next step is from there? Is there a device tree that needs to be updated?
Thanks

[Pavlos1]

There's no I2C (Linux) driver for the BL808 at present.

[offerpoloshirt]

There's no I2C (Linux) driver for the BL808 at present.

So is there any information about I2C (Linux) driver for the BL808 in the near future?

[Pavlos1]

Not really, most development seems to have stalled. Kernel development mainly happens/ed here:

https://github.com/arm000/linux-bl808/tr...ext/mboxic
https://github.com/bouffalolab/linux-dev
https://github.com/openbouffalo/buildroot_bouffalo
https://github.com/bouffalolab/bl808_linux