+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: how to enable /dev/i2c-0 on 0x64 (/showthread.php?tid=19222)
how to enable /dev/i2c-0 on 0x64 - donadams - 05-12-2024
Hi All, I've ran through this tut https://wiki.pine64.org/wiki/Ox64 and flashed my board. Along the way I enabled the i2c options in the buildroot menu but I don't see "/dev/i2c-0 " when booted. I also don't see i2c kernal msgs (not sure if there should be?). i2ctools is installed.
Wondering if anyone knows what the next step is from there? Is there a device tree that needs to be updated?
Thanks
RE: how to enable /dev/i2c-0 on 0x64 - Pavlos1 - 05-17-2024
There's no I2C (Linux) driver for the BL808 at present.
RE: how to enable /dev/i2c-0 on 0x64 - offerpoloshirt - 08-04-2024
(05-17-2024, 12:04 AM)Pavlos1 Wrote: There's no I2C (Linux) driver for the BL808 at present.
So is there any information about I2C (Linux) driver for the BL808 in the near future?
RE: how to enable /dev/i2c-0 on 0x64 - Pavlos1 - 08-05-2024
Not really, most development seems to have stalled. Kernel development mainly happens/ed here:
https://github.com/arm000/linux-bl808/tree/linux-next/mboxic
https://github.com/bouffalolab/linux-dev
https://github.com/openbouffalo/buildroot_bouffalo
https://github.com/bouffalolab/bl808_linux