SOQuartz64 4GB CM & Waveshare cm4-to-pi3

[krug3r]

Hello everyone,

Since two days, I search to solve my problem.
I test Plebian, DietPi, but with both distrib (on mSDCard and EMMC) the usb is not recognized (no keybord, mouse, etc)
from ssh session, I don't have logs, or specifique message with dmesg, no device attached with lsub command...

It's not the cm4-to-pi3 (https://www.waveshare.com/wiki/CM4-to-Pi3-Adapter), my Raspberry CM4 work without problem in this adpater.

I need help 


thx 

[CounterPillow]

You might need an overlay like this https://github.com/CounterPillow/overlay...ll/2/files

See also https://plebian.org/running/dt-overlays/

[krug3r]

You might need an overlay like this https://github.com/CounterPillow/overlay...ll/2/files

See also https://plebian.org/running/dt-overlays/

thx usb is alive   !!!!
compiled (available here) and put in plebian

[Nicholas97]

Hello everyone,

Since two days, I search to solve my problem.
I test Plebian, DietPi, but with both distrib (on mSDCard and EMMC) the usb is not recognized (no keybord, mouse, etc)
from ssh session, I don't have logs, or specifique message with dmesg, no device attached with lsub command... 
It's not the cm4-to-pi3 (https://www.waveshare.com/wiki/CM4-to-Pi3-Adapter), my Raspberry CM4 work without problem in this adpater.

I need help 


thx 

[quote pid="118320" dateline="1687981097"]
It seems the problem lies with the USB support in your distribution – you should check if the USB modules are loaded properly. 
[/quote]