+- PINE64 (https://forum.pine64.org)
+-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166)
+--- Forum: Quartz64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=169)
+--- Thread: SOQuartz64 4GB CM & Waveshare cm4-to-pi3 (/showthread.php?tid=18419)
SOQuartz64 4GB CM & Waveshare cm4-to-pi3 - krug3r - 06-28-2023
Hello everyone,
Since two days, I search to solve my problem.
I test Plebian, DietPi, but with both distrib (on mSDCard and EMMC) the usb is not recognized (no keybord, mouse, etc)
from ssh session, I don't have logs, or specifique message with dmesg, no device attached with lsub command...
It's not the cm4-to-pi3 (https://www.waveshare.com/wiki/CM4-to-Pi3-Adapter), my Raspberry CM4 work without problem in this adpater.
I need help
thx
RE: SOQuartz64 4GB CM & Waveshare cm4-to-pi3 - CounterPillow - 07-03-2023
You might need an overlay like this https://github.com/CounterPillow/overlay-examples/pull/2/files
See also https://plebian.org/running/dt-overlays/
RE: SOQuartz64 4GB CM & Waveshare cm4-to-pi3 - krug3r - 07-03-2023
(07-03-2023, 03:13 AM)CounterPillow Wrote: You might need an overlay like this https://github.com/CounterPillow/overlay-examples/pull/2/files
See also https://plebian.org/running/dt-overlays/
thx usb is alive
!!!!compiled (available here) and put in plebian
RE: SOQuartz64 4GB CM & Waveshare cm4-to-pi3 - Nicholas97 - 05-13-2025
(06-28-2023, 01:38 PM)krug3r level devil - not a troll game Wrote: Hello everyone,
Since two days, I search to solve my problem.
I test Plebian, DietPi, but with both distrib (on mSDCard and EMMC) the usb is not recognized (no keybord, mouse, etc)
from ssh session, I don't have logs, or specifique message with dmesg, no device attached with lsub command...
It's not the cm4-to-pi3 (https://www.waveshare.com/wiki/CM4-to-Pi3-Adapter), my Raspberry CM4 work without problem in this adpater.
I need help
thx
[quote pid="118320" dateline="1687981097"]
It seems the problem lies with the USB support in your distribution – you should check if the USB modules are loaded properly.
[/quote]