PINE64   ›   ROCK64   ›   Linux on Rock64   ›   Any advantages to using the mainline kernel

Any advantages to using the mainline kernel
dkebler
Pine Adept
***
Joined: Jun 2017
Posts: 46

Reputation: 3
#1
11-16-2019, 12:17 PM (This post was last modified: 11-16-2019, 12:18 PM by dkebler.)
I have installed the latest ayufuan bionic image with 4.4 kernel on a Rock64

Was thinking of switching to mainline kernel instead of 4.4 which I use on some other sbc's

https://github.com/ayufan-rock64/linux-b...upgrade.md

In particular I need to support interrupts, pullup/down and epoll.

What if any advantages are there to moving to the mainline kernel??  Especially with regards the gpio buses, DTOs and such.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  The state of mainline hardware decoding CounterPillow 17 8,928 01-26-2022, 03:39 PM
Last Post: sigmaris
  Linux 5.15 Kernel - openSuse mark1250 0 769 12-02-2021, 04:36 PM
Last Post: mark1250
  Security Patches for the Kernel kwinz 9 4,091 10-22-2021, 05:45 AM
Last Post: kwinz
Information Linux Mainline ayufan 63 73,033 05-14-2021, 10:41 AM
Last Post: Wizzard
  Debian kernel stuck at 4.4.167 Enig123 5 3,841 12-29-2020, 12:57 PM
Last Post: kwinz
  Arch Linux Arm --> Kernel 5.8 breaks installation as365n4 12 8,951 08-31-2020, 01:41 AM
Last Post: as365n4
  mainline kernel sound support Openwrt lucize 2 3,041 05-01-2020, 05:09 PM
Last Post: PakoSt
  5.3 kernel support? csrf 5 5,310 04-18-2020, 11:34 PM
Last Post: CameronNemo
  Help troubleshooting kernel panic gabrielfin 3 3,502 03-02-2020, 04:18 PM
Last Post: gabrielfin
  need a dts file to set some pins as pulldown interrupts in kernel using a DTO dkebler 0 1,564 02-05-2020, 10:58 PM
Last Post: dkebler

Forum Jump:


Users browsing this thread: 1 Guest(s)