Are the Pine64 Acrylic Open Enclosures Stackable?
#1
I was wondering if it's possible to stack the acrylic enclosures (https://www.pine64.org/?product=pine64-a...-enclosure) to hold multiple Pine A64s.

From what I see, this might be possible? I suppose I can use the bottom piece repeatedly to mount the individual boards and just use one single top piece at the very top?
  Reply
#2
(01-02-2019, 01:47 PM)abhinava Wrote: I was wondering if it's possible to stack the acrylic enclosures (https://www.pine64.org/?product=pine64-a...-enclosure) to hold multiple Pine A64s.

From what I see, this might be possible? I suppose I can use the bottom piece repeatedly to mount the individual boards and just use one single top piece at the very top?

The original design didn't take stackable into consideration. However, if you able to special screw that can link the poles together, it can becomes stackable.
  Reply
#3
I'm trying the same, and I'd love to know the spec of the large hand-tighten screws that serve as legs -- my intention is to get an longer version of them, and saw off the head to tie together two acrylic cases.
  Reply
#4
(07-15-2020, 01:47 PM)lbruno Wrote: I'm trying the same, and I'd love to know the spec of the large hand-tighten screws that serve as legs -- my intention is to get an longer version of them, and saw off the head to tie together two acrylic cases.

I used M8-1.25x16mm grub screws successfully to stack two of these enclosures:
https://imgur.com/a/Zka1qfb

Obtained mine from Farnell.
  Reply
#5
(08-06-2020, 02:35 PM)lbruno Wrote:
(07-15-2020, 01:47 PM)lbruno Wrote: I'm trying the same, and I'd love to know the spec of the large hand-tighten screws that serve as legs -- my intention is to get an longer version of them, and saw off the head to tie together two acrylic cases.

I used M8-1.25x16mm grub screws successfully to stack two of these enclosures:
https://imgur.com/a/Zka1qfb

Obtained mine from Farnell.

Thanks on the info.
  Reply
#6
(08-11-2020, 09:59 PM)tllim Wrote:
(08-06-2020, 02:35 PM)lbruno Wrote:
(07-15-2020, 01:47 PM)lbruno Wrote: I'm trying the same, and I'd love to know the spec of the large hand-tighten screws that serve as legs -- my intention is to get an longer version of them, and saw off the head to tie together two acrylic cases.

I used M8-1.25x16mm grub screws successfully to stack two of these enclosures:
https://imgur.com/a/Zka1qfb

Obtained mine from Farnell.
What are the dimensions of the standoffs delivered with the pine64 acrylic box - http://files.pine64.org/doc/guide/PINE64..._Guide.pdf ?

Thanks on the info.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Made a case for the Pine64 with Audio DAC installed kodachrome 1 562 11-12-2019, 04:52 AM
Last Post: xalius
Video 7" LCD wooden framen enclosure for Pine64 *UPDATED WITH killor 12 3,819 10-12-2018, 03:08 PM
Last Post: tllim
  A case with active cooling for 1Gb pine64 ishwest 5 1,990 06-28-2017, 04:05 AM
Last Post: ishwest
  Acrylic case with Lipo Holder and 2 Tactile push button included killor 9 3,277 10-24-2016, 08:18 AM
Last Post: killor
  Pine64 DOA - and they don't care mldavies 4 2,356 10-13-2016, 03:57 AM
Last Post: tllim
  Pine64 Layer case modmypi 2 1,228 10-04-2016, 02:45 AM
Last Post: modmypi
  Anyone wanna swap enclosures ? stephen0205 2 1,016 08-27-2016, 09:13 AM
Last Post: stephen0205
  Pine64 Playbox case STP conversion RockE 14 5,857 08-26-2016, 08:05 AM
Last Post: pspina3rd
Photo LEGO Enclosure for PINE64 w/LCD Yardle 4 1,325 08-24-2016, 09:28 AM
Last Post: pspina3rd
Video Acrylic enclosure for PINE A64 killor 71 22,191 08-12-2016, 06:53 AM
Last Post: killor

Forum Jump:


Users browsing this thread: 2 Guest(s)